PET bottle washing line :

XINTING Good Supplier plastic bottle wash recycle line PET bottle washing recycling machine
1-Plastic recycling washing machine is applied in PET waste bottle or sheet recycling field.

2-Through crushing, washing and dry process, the waste bottle or sheet will become to be bottle flakes. The flakes are widely used in plastic industry, like sheet, and profile production.

3-The clean flakes can be used to produce the polyester staple fiber, PET strap band, granules, PET transparent film and sheets, etc. The top class flakes can be used to blow bottles again.

4-Recycling machine can be designed on the basis of how dirty the flakes are, and make sure of the quality of the final products are very clean.

5-Recycling plastic machine output we can supply is from 300kg/h to 3000kg/h.

PP PE FILM WASHING RECYCLING MACHINE

Application : Suit for recycling PP/PE waste film, Post consumer film, Food contaminated film, Garbage

film, Agricultural film, Mulching film, Greenhouse film, PP woven bags etc.

Specification : The production line is mainly composed of Plastic Film Shredder/ Plastic Film Granulator, Friction

Washer, Sink Floating Tank, Horizontal Centrifugal Dryer, Squeezer or Squeezer & Agglomerator. The whole

production line is easy to operate, efficient and low energy consumption.

film recycling machine

Description for PP PE film washing line :

PP PE FILM WASHING LINE is designed to clean recycled plastic woven sack and plastic farm film, the machine is widely used for PET,PP,PE plastic cleaning and plastic bottle cleaning. Developing on the basis of advanced technology, the machine has advantages of stable performance, high output, energy efficiency, small floor area and good appearance. We can produce the machine according to client requirement.

There are 300-2000kg/h etc capacity , we need make quotations according to your detailed requirements .

PLASTIC FILM SQUEEZING MACHINE
After plastic recycled film materials are washed, the moisture is usually retain over 30%. Therefore, our superior design team specially developed a squeezer to meet customers’ needs. Through this machine, water and volume of the materials can be squeezed to increase the quality of the pellets and the efficiency of the extruders.

Through our dedicated screw design, washed materials can be squeezed to dehydrate water of films or fluffy stuff. The recycled materials you feed are squeezed to become flakes or lumps .The moisture they contain will be lowered down to 1-3%. After being squeezed, these lumps or flakes with much lower moisture and higher density can be directly fed into pelletizing extruder. Its output can amount to 700~1000kg/hr per hour and the degradation of the pellets will be highly decreased. Furthermore, you don’t need to increase heating rate. The quality and validity of the pellets and the efficiency of the extruder will be improved with the increased capacity.

film squeezing machine